Skip to content
TaskNinja

HomeToolsETABS Viewer

ETABS Viewer

Open ETABS .e2k and SAP2000 .s2k models in 3D without ETABS. Nothing is uploaded.

EtabsOpenFreeNo signupOn your device
Opening the tool…

What this tool does

ETABS Viewer opens an ETABS .e2k or SAP2000 .s2k text model in this browser, draws the building in 3D with a plan for every story, and lists sections, slabs, walls, supports and load combinations with a ready quantity take-off.

How to use it

  1. Choose an ETABS .e2k or .$et file, or a SAP2000 .s2k or .$2k file, or drop it on the box. Nothing is uploaded.

  2. The model opens in 3D. Drag to turn it, scroll or pinch to zoom, or press Front, Side or Plan. Pick a story from the list to see that floor plan on its own.

  3. Tap a column, beam, brace, slab, wall or point to read its label, story, section and size. Tap a section in the table to light up every frame that uses it.

  4. Download a PNG of the view, a PDF report, the take-off, frames or points as CSV for Excel, or copy a text summary.

Common uses

ETABS is the building analysis program most structural consultants in India, the Gulf and much of Asia use for RCC and steel towers, and SAP2000 is its general purpose sibling for bridges, sheds and industrial structures. Both are paid Windows programs from Computers and Structures, Inc. (CSI). Architects, site engineers, project managers, checking engineers, students and clients are often sent a model and have no licence to look at it. This page opens the text version of the model on any laptop, Mac, Chromebook or phone.

ETABS stores each object once in plan and then assigns it story by story, so the raw .e2k text is hard to read. The viewer places every assignment at its real level: columns run from the story below, walls take their corner offsets, and points dropped below a story (for piles or sunken slabs) sit at the right height. You get the whole building in 3D, plus a clean plan of any story with its beams, columns, slabs and walls.

The take-off is worked out from the model itself. For every frame section you see the count, total length and concrete volume from its dimensions, plus steel weight when the file gives the material's weight per volume. Slab, deck and wall properties get their count, area and volume from the thickness. A stories table lists heights, levels, masters and similar-to stories. That is enough for a quick quantity check, a BOQ cross-check or a review comment without opening ETABS.

Loads come with it as defined: load patterns with their type, load cases, and every combination written out with its factors, such as 1.5 x Dead + 1.5 x Live. Supports are drawn on the model and counted as fixed, pinned or spring.

Private, and the limits

Structural models are client property and often under NDA, so nothing leaves your device. The file is read by a worker in this browser tab and the drawing, PDF and CSV files are made on your computer. There is no upload, no account and no AI model. Closing the tab clears everything.

This is a viewer, not a substitute for ETABS. A text model holds the definition, not analysis or design results, and sections imported from a steel database without dimensions show length but no volume. Curved frames and rare objects such as links and tendons are drawn as straight lines or left out.

Official sources

Last checked 2026-11-10.

FAQ

How do I open an .e2k file without ETABS?
Choose the .e2k file on this page. It opens in Chrome, Edge, Firefox or Safari on Windows, Mac, Linux, Android or iPhone with nothing to install and no CSI licence.
Can I open an ETABS .EDB file here?
No. The .EDB is a binary database only ETABS reads. Ask the sender for the text model: in ETABS choose File, Export, ETABS .e2k Text File. ETABS also writes a .$et text backup next to the .EDB every time it saves, and that file opens here too.
Does it open SAP2000 files?
Yes. SAP2000 .s2k and .$2k text files open in the same viewer with joints, frames, areas, restraints, sections and load combinations. The binary .SDB needs SAP2000, so export a .s2k from File, Export first.
Are analysis results shown?
No. Results such as forces, drifts and design ratios are not stored in a text model. You see the geometry, properties, supports and loads exactly as the file defines them.
How is the concrete volume worked out?
Each rectangular or circular section's area comes from its depth and width in the file, times the total length of frames using it. Slab and wall volume is the polygon area times the thickness. Overlaps at joints are not deducted, so treat it as a gross figure.
Is my model uploaded anywhere?
No. The model stays in this browser tab. TaskNinja never receives the file, its name or its contents.

Related tools

SAP2000 Viewer (.s2k)ETABS E2K to PDF reportSTAAD File ViewerAll tools