Skip to content
TaskNinja

HomeToolsFEA Mesh Viewer

FEA Mesh Viewer

Open Abaqus .inp, Nastran .bdf and Gmsh .msh meshes in 3D without Abaqus. Nothing is uploaded.

MeshOpenFreeNo signupOn your device
Opening the tool…

What this tool does

FEA Mesh Viewer opens an Abaqus or CalculiX .inp, a Nastran .bdf or a Gmsh .msh file in this browser, draws the mesh in 3D part by part, and lists element types, materials, sets, boundary conditions, loads and steps.

How to use it

  1. Choose an .inp, .bdf, .nas, .dat or .msh file, or drop it on the box. If the deck pulls in other files with *INCLUDE or INCLUDE, choose them together. Nothing is uploaded.

  2. The mesh opens in 3D with its element edges. Drag to turn it, scroll or pinch to zoom, or press Front, Top, Right or Isometric. Switch between shaded, shaded with mesh and wireframe.

  3. Tick or untick each section, property or physical group to look inside an assembly. Read the element types, materials with Young's modulus and density, node and element sets, boundary conditions, loads and analysis steps under the view.

  4. Save the view as PNG, the visible outer surface as STL, the nodes and elements as CSV for Excel or Python, or a plain text report of the whole model.

Common uses

Finite element input decks are plain text, but nobody can picture a mesh from a list of node numbers. Abaqus, MSC or NX Nastran, HyperMesh, Femap and ANSA all cost money and run on Windows or Linux workstations, so a reviewer, a supplier, a student or a manager who is sent a deck usually has no way to look at it. This page draws the model on any laptop, Mac, Chromebook or phone in a few seconds.

Abaqus and CalculiX .inp decks open with their parts and instances placed where the assembly puts them, including translated and rotated instances, *NODE and *ELEMENT blocks, NSET and ELSET sets (with GENERATE ranges), sections tied to their materials, and *INCLUDE files you pick with the deck. Solid, shell, membrane, plane, axisymmetric, beam and truss elements are recognised from their type names, such as C3D8R, C3D10, S4R, S3, CPS4 and B31.

Nastran bulk data opens in small field, large field and free field format with continuation lines, from MSC Nastran, NX Simcenter Nastran, OptiStruct, Femap and HyperMesh. GRID points in CORD2R, CORD2C and CORD2S systems are placed in the basic system, elements are grouped by property ID with the names HyperMesh and Femap write into comments, and MAT1, SPC, FORCE, PLOAD and GRAV cards are listed, along with the SOL type and subcases.

Gmsh .msh files open in version 2.2 and 4.1, as text or binary, with their physical group names. For a volume mesh the boundary groups start hidden so you see the solid, and one tick shows the surface where a load or support sits. The STL download is the outer skin of the ticked groups, ready for a slicer, a CAD import or a quick check in another program.

Private, and the limits

Simulation models are often confidential product data, so the file never leaves your device. It is read by a worker in this browser tab and the picture, STL, CSV and report are made on your computer. There is no upload, no account and no AI model. Closing the tab clears everything.

This is a model viewer, not a solver or a post-processor. Results files such as .odb, .op2, .frd and .rst are not read, quadratic elements are drawn with straight edges between their corner nodes, and rare element types are counted but not drawn. Sizes are in the units of the file, because FE decks do not store units.

Official sources

Last checked 2026-11-16.

FAQ

How do I open an Abaqus .inp file without Abaqus?
Choose the .inp file on this page. It opens in Chrome, Edge, Firefox or Safari on Windows, Mac, Linux, Android or iPhone with nothing to install and no Abaqus licence. CalculiX decks use the same format and open the same way.
Can I open an Abaqus .odb file here?
No. The .odb is a binary results database that only Abaqus can read. To share the model, write the input file in Abaqus/CAE (Job, Write Input) and open that .inp here.
Which Nastran files work?
Bulk data decks with the .bdf, .nas, .dat, .fem or .blk extension, with or without the executive and case control sections. Results files (.op2, .xdb, .h5) and punch output are not read.
My deck shows no elements. Why?
The model is probably in included files. When the main deck has *INCLUDE or INCLUDE lines, the page names the missing files. Pick the main deck and the included files together in the file picker.
Can it run an analysis?
Not this page. To run a linear static stress or frequency study on your own part, open Trevolyx Simulation, our free 3D CAD in the browser. It also runs on your device with nothing uploaded.
How big a model can it open?
Decks with a few hundred thousand elements open in a few seconds on a recent laptop. A 35 MB deck with 375,000 hexahedra was used to test it. Very large models are limited by the memory of the browser tab, and phones have less of it.

Related tools

INP, MSH and BDF to STLSTEP File ViewerSTAAD File ViewerAll tools